
FLIR CM78-PV solar clamp meter
Diagnose solar and electrical problems with the CM78-PV.
Measure the sunlight. Verify the panel. Check the electrical system.
Choose purpose-built instruments for solar installation, commissioning and maintenance in South Africa, individually or together as a GoThermal kit.
Request a QuoteCompare instruments
Limited-time Black November offer until 30 November 2026
R24 197 incl. VAT
Save R1 200 compared with buying the three instruments individually for R25 397 incl. VAT at current GoThermal prices.
The FLIR Solar PV Testing Kit combines the PV78, PV48 and CM78-PV. Record environmental conditions, assess an individual panel and investigate electrical measurements with the appropriate instrument.

The kit does not extend any instrument's limits. The PV48 is for individual panels only, not high-voltage strings.

Measure PV circuits with up to 1500 V DC voltage measurement and up to 1000 A AC/DC clamp measurements. True RMS, VFD, LoZ and inrush functions support electrical troubleshooting.

Understand the conditions behind panel output. Measure sunlight and temperature, then check panel direction and inclination.

Check maximum power and inspect the displayed I-V curve on individual PV panels. Measure open-circuit voltage and short-circuit current within the independent instrument limits.
Watch these videos from GoThermal.

Diagnose solar and electrical problems with the CM78-PV.

Explore solar-panel inspection, installation and troubleshooting.
| Instrument | Primary task | Key capability | Important distinction |
|---|---|---|---|
| CM78-PV | Electrical circuit testing | 1500 V DC; 1000 A AC/DC | CAT III 1500 V / CAT IV 600 V. IR spot thermometer, not a thermal camera. |
| PV78 | Environmental conditions | 50 to 1400 W/m², temperature, tilt and compass | Does not measure panel electrical power. |
| PV48 | Individual-panel performance | 800 W, 60 V, 30 A; I-V curve display | Not for high-voltage strings. All independent limits apply. |
| GoThermal kit | Combined inspection workflow | PV78 + PV48 + CM78-PV | Each tool retains its own ratings and limitations. |

Electrical measurements for PV and industrial circuits.
View details
Record sunlight, temperature and panel alignment.
View details
Assess individual-panel electrical performance.
View details
Combine conditions, panel and electrical testing.
R24 197 incl. VAT
Black November: buy the kit and save R1 200.
No. The PV48 is for individual panels within 800 W, 60 V and 30 A limits. It must not be connected to high-voltage solar strings. The CM78-PV supports electrical measurements up to 1500 V DC with the appropriate rated leads and safe working procedures.
Solar-panel output changes with sunlight and temperature. Record those conditions with the PV78 alongside electrical readings so that comparisons have useful context.
The CM78-PV and PV78 support Bluetooth connectivity with FLIR METERLiNK. METERLiNK is not claimed for the PV48.
No. The CM78-PV has an infrared spot thermometer, not a thermal imaging camera. The kit combines the CM78-PV, PV78 and PV48.
Yes. Use the product links above to explore each instrument or request a quotation for the combination that suits your work.
Tell GoThermal whether you are checking individual panels, environmental conditions or electrical circuits, and provide the expected voltage, current and power. Qualified personnel must follow the manufacturer manuals and use appropriately rated equipment.
Tell us about your solar testing application. Request the complete kit or individual FLIR instruments from GoThermal.
Form not loading? Contact sales@GoThermal.co.za or +27 11 557 9200. Please avoid sharing sensitive personal information.