The IBAC 2 is a fully automated bio-detection sensor that can support continual, 24/7, air monitoring or can be set to targeting sampling windows to align to hours of operation. It alarms in less than 60 seconds when a bio-threat is present. IBAC can be configured to support automated aerosol sampling either in conjunction with its’ triggered alarms or at a set frequency sampling time. In wide service throughout the world, IBAC 2 is used to collect and detect aerosolized agents for all four classes of biological threats (spore, viral, cellular, and protein toxins) with low false alarm.
REAL-TIME WARNING CAPABILITY
Autonomous 24/7 operation with no consumables. Detection algorithms for indoor and outdoor use.
ALARM AUTOMATICALLY TRIGGERS SAMPLE COLLECTION
System triggers collector only when high-probability of bio-agent threat, greatly reducing consumables and number of samples to process.
MOST WIDELY DEPLOYED BIOLOGICAL TRIGGER
Operates as part of a network configuration in "first tier" building protection system, or via battery for mobile detection capability.
Specifications
| FLIR IBAC 2 | |
| Battery Specification | Li-ion BB 2590 military battery; up to 14 hrs runtime; charge < 4 hrs |
| Enclosure & Protection | Aluminum, IP66 weatherproof |
| Technology | UV Laser Induced Fluorescence (LIF) |
| Threats | Spores, vegetative bacteria, viruses, and toxins; particle size: 0.7 – 10 microns |
| Enviromental | |
| Operating Temp & Humidity | -5 to 125 °F (-20 to 50 °C) 5% to 95%, non-condensing |
| Storage Temperature | -40 to 160 °F (-40 to 70 °C) |
| Physical Features | |
| Dimensions (L x W x H) | 9.5 x 6.5 x 9.0 in (24.0 x 16.5 x 22.9 cm) - without battery; DFU Collector: 3.5 x 3 in (H x Diameter) 8.9 x 7.6 cm; C100 Collector: 4.5 x 5.5 in (H x Diameter) 11.4 x 14 cm |
| Weight | 7.5 lbs (3.4 kg); DFU Collector: 1.3 lbs (0.6 kg); C100 Collector: 3.0 lbs (1.4 kg) |
| Power | |
| Cold Start Time | < 5 mins |
| Input Voltage | 100-240 VAC (adapter supplied); 18-36 VDC |
| Power | DFU Collector: 60 watts; C100 Collector: 60 watts |
| Sampling & Analysis | |
| Collection Media | DFU Collector: Dry sampling - polyester felt filters (47mm diameter, 1 micron); C100 Collector: Wet sampling - buffer rinse fluid provided in premeasured vials |
| Max Flow Rate | DFU Collector: 100 L/min; C100 Collector: 200 L/min |
| Particle Size | DFU Collector: 1 to 10 microns; C100 Collector: 1 to 10 microns |
| Sample Collection | Integrated with DFU or C100 sample collector (see below) |
| Sample Introduction | Airborne particles; triggered aerosol sample collector |
| Sample Phase | Aerosol; flow rate 4.0 L/min (0.14 ft3 /min) |
| Sample Recovery | DFU Collector: Particle extraction from filter performed in vial with liquid buffer; C100 Collector: Manual liquid rinse performed at collector, yields 6mL of liquid |
| Sampling & Analysis | Continuous sampling 24/7/365; indoor/outdoor alarm settings; analysis time configurable down to 1 second |
| Sampling Method | DFU Collector: Dry collection; C100 Collector: Wet or dry collection |
| Sensitivity | < 100 particles/L of air |
| System Interface | |
| Communication | Ethernet, RS-232; optional embedded wireless (900MHz or 2.4GHz) |
| Data Storage | Internal 2 GB MicroSD memory card; stores over 1 yr of data |
| Display & Alerts | On-board LED for visual indication; full display via software on external computer |
| Output | Particle data, sensor diagnostics, bio-alarm, and fault |
| Training Requirments | < 2 hrs |
Related Documents
Get a Quote
Please complete the form below to submit your quote request.
Export Restrictions
The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.